Product ID:EP5041, INSL-TILE HIGH GLOSS EPOXY DARK BLU
MSDS Date:09/30/1988
FSC:8030
NIIN:00N030874
MSDS Number: BPGTX

INSL-X PRODUCTS CORP

115 WOODWORTH AVE
YONKERS, NY 10701
US

Emergency Phone: 914-969-8000

Info Phone: 914-969-8000

Cage: 75038

INSL-X PRODUCTS CORP

694 YONKERS, NY 10702 US

Cage: 75038

2,4,6-TRIS(DIMETHYLAMINO METHYL) PHENOL; (TERTIARY AMINE).

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: 1-1.2%

OSHA PEL 5 PPM (MFR)

ACGIH TLV: 5 PPM (MFR)

1%.

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: SEE ING

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

1.3%.

CAS: 2807-30-9

RTECS: KM2800000

Fraction By Weight: SEE ING

0.8%.

CAS: 64742-94-5

RTECS: WF3100000

Fraction By Weight: SEE ING

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

NOT

RTECS: 9999999ZZ

FT PER MIN HOOD FACE VELOCITY.

RTECS: 9999999ZZ

SOURCE OF CLEAN WATER TO FLUSH EYES &

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPORS MAY IRRITATE EYES, SKIN &
RESPIRATORY TRACT. EXPOSURE/INGESTION MAY CAUSE HEADACHE, DIZZINESS
& NAUSEA. CONTACT MAY CAUSE SKIN IRRITATION OR ALLERGIC SKIN
REACTION. MAY BE HARMFUL IF ABSORBED T HROUGH SKIN. OVEREXPOSURE
MAY DAMAGE RED BLOOD CELLS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:MOVE TO FRESH AIR. IF BREATHING STOPS, APPLY ARTIFICIAL
RESPIRATION. EYE:FLUSH W/WATER FOR AT LEAST 15 MINUTES (LIFT LIDS).
SKIN:WASH AFFECTED AREAS W/SOAP & WATER. REMOVE CONTAMINATED
CLOTHING. IN CASE OF CONTACT, CALL MD IMMEDIATELY. INGEST:DO NOT
INDUCE VOMITING & CALL MD.

Flash Point Method:SCC
Flash Point:80.0F,26.7C
Lower Limits:0.8%
Upper Limits:15.8%
Extinguishing Media:WATER FOG, FOAM, CO2 & DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. USE WATER FOG TO COOL CNTNRS. USE WATER SPRAY TO DILUTE SPILLS.
WEAR PROT CLTHG. FIGHT FIRE FROM (SUPDAT)
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL & IGNITE OR FLASHBACK.

Spill Release Procedures:ABSORB W/SAND & DISP OF IN APPRVD MANNER. DIKE
AREA W/SAND TO CONTAIN SPILLED LIQ. RECOVER FREE PROD. WEAR PROT
CLTHG DURING CLEANUP. VENT CONFINED SPACES. OPEN WINDOWS & DOORS.
USE WATER SPRAY TO DIL UTE SPILL. SHUT OFF & ELIM ALL IGNIT (SUPP
DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:OVERHEATING MAY CAUSE CNTNR TO
RUPTURE. USE EXPLO-PROOF ELEC EQUIP. ISOLATE PROD FROM HEAT, SPKS &
OPEN FLAME. STORE IN COOL, WELL VENTED AREA.
Other Precautions:EMPTY CNTNRS RETAIN RESIDUE & CAN BE DANGEROUS. DO
NOT CUT, WELD, BRAZE/SOLDER SUCH CNTNRS. GROUND CNTNRS WHEN
TRANSFERRING FROM ONE TO ANOTHER. VENT ADEQ TO MAINTAIN VAP CONCS

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR IS RECOMMENDED IN
AREAS OF POOR VENTILATION. MAINTAIN GOOD VENTILATION.
Ventilation:PROVIDE ADEQ CROSS AIR CIRCULATION. EXHST @ POINT OF USE.
COMPLETE AIR CHANGE IN WORK AREA EVERY 3 MINS. LOC (ING 5)
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH STATION (FOUNTAIN). EMERGENCY
(SAFETY) SHOWER. USE CHEM RESISTANT APRON/OTHER IMPERVIOUS CLTHG.
PROVIDE A(ING 7)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOLAT:49.35-63.24. FIRE FIGHT PROC:SAFE DIST. SHUT OFF ALL POWER TO
AREA. SPILL PROC:SOURCES. SCOOP UP/VACUUM INTO CNTNR FOR DISP.
OTHER PREC:AVOID RPTD/PRLNG BRTHG/CONT W/SKIN. KEEP CNTNRS CLSD WHE
N NOT IN USE. DO NOT HANDLE/STORE NEAR HEAT, SPKS/FLAME. MIN BRTHG
VAP/MIST. DO NOT TAKE INTERNALLY.

HCC:F5
Boiling Pt:B.P. Text:>230F,>110C
Vapor Pres:SEE ING 2
Spec Gravity:0.920-1.283
Evaporation Rate & Reference:SLOWER (REL TO N-BUAC)
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:OPAQUE LIQUID; SOLVENT ODOR.
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES & SMOKE. OXIDES OF CO &/OR CO2.
NOX. ALDEHYDES.

Waste Disposal Methods:LANDFILL I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. KEEP PRODUCT OUT OF SEWERS & WATERWAYS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.